Advanced Settings

In this section:

Manage Advanced Settings

Available Advanced Settings

Advanced Settings allow you to configure additional settings which will be applied on managed endpoints when an Application Control configuration is deployed. If a new configuration is deployed that contains new advanced settings, any pre-existing advanced settings in place on the end point will be deleted.

Manage Advanced Settings

  1. Open an Application Control configuration.
  2. Navigate to Configuration Settings > Advanced Settings tab.

  3. Right- click and select Add to display the Add Advanced Settings dialog.
  4. Select the settings you want to configure and click OK. You can select multiple settings.

  5. The selected settings are added to the Advanced Settings tab.

  6. Set the values as required. If you select a setting you can view a description below the table.
  7. Click Save.

The settings are applied when the configuration is deployed to your managed endpoints.

Available Advanced Settings

Security Controls Application Control contains the following configurable advanced settings:

Setting Data Type Description
ADComputerGroupMembershipTimeoutSecs Numeric Timeout, in seconds, for nested computer group lookups. The default setting is 120 seconds and setting this value to 0 disables the timeout.
ADQueriesEnabled Numeric This setting controls the types of AD queries used to determine the system's Distinguished Name and computer group membership.

A value of 0 disables queries made to AD and the use of computer groups and OU in the configuration.

The default value of 1 causes the agent to perform both the Distinguished Name and direct (non-nested) computer group AD queries. Nested computer groups in the configuration are ignored.

A value of 2 causes the agent to perform the Distinguished Name, direct and nested computer group AD queries. This setting could cause performance issues on the DC due to high CPU usage.

AlternateTOCheck Numeric Trusted Ownership checks have occasionally caused excessive CPU usage in the SYSTEM process when third party filter drivers are installed on the system. Enabling this setting, using a value of 1, causes Application Control to use an alternative method of looking up Trusted Ownership, which mitigates this issue in some cases.
AMFileSystemFilterFailSafe Numeric This setting configures whether the file system filter driver operates in a Fail Safe or Fail Secure mode. If there is a problem with the Agent and it stops responding, the driver disconnects in Fail Safe mode and does not intercept anymore requests. A value of 1 indicates Fail Safe, 0 indicates Fail Secure. Fail Safe is the default. Changing this setting requires an Agent restart to take effect.
AppHookDelayLoad Text This setting causes the AmAppHook Dll to load after a configurable number of milliseconds (ms) delay. This setting is configured on a per filename basis. The format is <filename+extension>,<delay>. The filename and extension can contain wildcards. Each pair is semi colon delimited. For example 'calc.exe,2000;note*.exe,6000'
AppHookEx Text Application Control utilizes a Windows hook as part of the Application Network Access Control (ANAC) feature. In rare cases, applications can display unexpected behavior when hooked. This setting is a list of applications in which ANAC specific functions are not hooked and therefore not subject to the ANAC rules.

If an application is named in both AppHookEx and UrmHookEx, the AmAppHook.dll is not loaded. Multiple entries are delimited by a semi-colon (;).

AppInitDllPosition Numeric Use this setting to specify whether the AsModLdr driver or the Appinit registry key is used to inject the Application Control hook. This setting is also used to determine the position of AMLdrAppinit.dll in the AppInit_DLL registry value.

Set one of the following values:

  • 0 - Positions the AMLdrAppInit.dll at the beginning of the AppInit_DLLs list.
  • 1 - Positions the AMLdrAppInit.dll at the end of the AppInit_DLLs list.
  • -1 - Excludes the AMLdrAppInit.dll from AppInit_DLLs and ASModLdr lists. When the AMLdrAppInit.dll is excluded from both lists, no automatic injection will occur.
  • 2 - Adds the AMLdrAppInit.dll to the ASModLdr list of dlls to be injected. This is the default setting.

This setting should only be used under the guidance of the Ivanti Support Team.


With Citrix clients using published applications, Windows Active Setup is not run as part of the Citrix client log on. By default Application Control detects that the client is using a Citrix protocol and then assumes Active Setup is excluded so that blocked applications will never be allowed under circumstances that may look like Active Setup. In addition, and optionally, Application Control can impose a more stringent check for Citrix being involved: set the value of this setting to 1 so that Application Control imposes the more stringent check if it appears that denied applications are being allowed in these circumstances. Set the value to 2 to stop Application Control from making these 'Citrix' checks at all if applications appear to be blocked during a real Active Setup.


BrowserAppStorePort Numeric Enter the port used to allow the Browser Control Chrome extension to be installed.
BrowserCommsPort Numeric Enter the port used for communications from browser extensions to the agent.
BrowserExtensionInstallHive Numeric This engineering setting allows the administrator to choose which registry hive the Application Control Chrome browser extension will be installed in. Options are:
  • 0 - Extension not installed
  • 1 - Install to HKLM
  • 2 - Install to HKCU.

0 is where the administrator must manually configure their own enterprise appstore to deploy the Application Control Chrome Extension. The default behaviour is 2 - for the chrome extension to be installed in HKCU.

BrowserHookEx Text The value can be set to 'Chrome.exe' to stop the Application Control browser hook (BrowserHook.dll) from being injected into it. The browser hook prevents all network communications until the Chrome Extension has established a connection with the Application Control Agent.

No core functionality is affected by this custom setting.

BrowserNavigateEx Text A pipe (|) delimited list of navigation URLs that bypass the navigate event processing. The URLs in this list are not subject to URL redirection.
ComputerOUThrottle Numeric This setting limits an Active Directory look-up per connecting client for checking Organizational Unit membership by limiting the number of concurrent queries. This throttling helps reduce the amount of query-traffic on a domain if handling a large volume of connecting clients. Set this value between 0 and 65535.
DFSLinkMatching Numeric DFS Link paths can be added to the rules. DFS Links and DFS Targets are treated as separate independent items to be matched. There is no conversion from Link to Target before applying the rules. Set this value to 1 to enable DFS Link matching.
DirectHookNames Text Application Control's Windows hook is loaded into all processes that load user32.dll by default. Applications which do not load this DLL are not hooked. Any applications which do not load user32.dll should be included in this setting as part of a semi-colon delimited list of full paths or filenames.
DisableAppV5AppCheck Numeric By default, any application launched using AppV5 is exempt from Trusted Ownership checking. Use this setting to disable this behavior with a value of 1.
DisableSESecondDesktop Numeric By default, the auditing dialog for Self-Elevation displays on a second desktop. Set to 1 to display the dialog on the primary desktop.
DoNotWalkTree Numeric By default, process rules check the entire parent key for a match. This setting instructs process rules to only look at the direct parent of the process and not check the entire tree. A value of 1 enables this setting.
DriverHookEx Text A semi-colon delimited list of applications that will not have the Application Control Hook (AMAppHook.Dll) injected. Application Control requires the hook to be loaded for certain functionality to work. This custom setting should only be used under the guidance of the Ivanti Support Team.
EnableScriptPreCheck Numeric Whilst scripts within scripted rules are processing, they are treated as though they have returned a false value. The length of time scripts take, varies according to their content. This setting provides the best performance during computer start-up and user logon because anything depending on the result of a script is not delayed. Set the value to 1 to make processes wait until the relevant script has finished. This can significantly slow down computer start-up and user login.

Application Control does not wait indefinitely for scripts results - a 30 second timeout is applied.

EnableSignatureOptimization Numeric This setting improves the performance of rules checking, when using signatures. Files that do not match the full path are not hashed as it is assumed they are not the same file. Set to 1 to enable.

Enabling this setting and ExtendedAuditInfo will not show any hashed file name in auditing metadata.

ExplicitShellProgram Text This setting is used by Application Access Control (AAC). Application Control treats the launch of the shell program (by default explorer.exe) as the trigger for that session to be considered logged on. Different environments and technologies can change the shell application and the agent on occasion can't detect what the shell program is. Application Control uses the applications in this list (in addition to the default shell applications) to determine when a session is deemed to have logged on. This is a semi-colon delimited list of full paths or filenames.
ExProcessNames Text A list of space separated filenames that should be excluded from the filter driver.

Changing this setting requires an Agent restart to take effect.

ExtendedAuditInfo Numeric This setting extends the file information for audited events. It reports the Secure Hash Algorithm 1 (SHA-1) hash, file size, file and product version, file description, vendor, company name, and product name for each file in its audited events. The information is added immediately after the file name in the event log. This setting is on by default. To turn it off, enter a value of 0.

The generation of a hash or checksum is disabled when the EnableSignatureOptimization setting is enabled.

ForestRootDNQuery Numeric Set the value to 1 to enable the Application Control Agent to perform a forest root query. The query includes chasing referrals to determine the Distinguished Name of connecting devices for the purposes of OU and Computer Group membership in Device Rules.
ImageHijackDetectionInclude Text A list of process names against which all child processes are verified to ensure the child image is running without corruption or modification and is a match for the one that was initially requested. If the child process is not verified, it is terminated. This is a semi-colon delimited list of full paths or file names.
OwnershipChange Numeric Application Control detects if a trusted file is changed by a non-trusted owner. In such a case, the file owner is changed to the untrusted user and any execute requests are blocked. Some applications overwrite files in such a way that Application Control does not detect it by default, therefore the owner of the file is not changed. When enabled, Application Control performs additional checks to catch all file changes and overwrites should be caught. Set to a value of 1 to enable.
RemoveDFSCheckOne Numeric When files are stored on a DFS drive, the Application Control agent uses a number of strategies to evaluate the correct UNC path. One of these strategies can cause delays during login if large numbers of scripts and executables are stored in and replicated by, Active Directory. Set to a value of one to enable, causing Application Control to ignore this strategy and increase performance in this situation.
SECancelButtonText Text The text displayed by the cancel button on the Self-Elevation dialog.
SelfElevatePropertiesEnabled Numeric Set this value to '1' to enable self-elevation of properties. This feature is disabled by default.
SelfElevatePropertiesMenuText Text The text in the context menu option for self-elevation of properties.
SEOkButtonText Text The text displayed by the OK button on the Self-Elevation dialog.


Set the value to 1 to display the Application Control access denied message box for denied DLLs.


UrlRedirectionSecPolicy Numeric By default, the security policy is ignored by the URL Redirection feature. This engineering setting allows the administrator to force URL Redirection to follow the configured security policy. Set to a value of 1 to enable.

Self Authorization is not supported.

UrmForceMediumIntegrityLevel Text A User Privilege Management (UPM) custom setting used to override the integrity level when user privileges are elevated applications, which by default sets the integrity level to high. When this setting is used, the level is reduced to medium. This value should be a semi-colon delimited list of file names.
UrmHookEx Text Application Control utilizes a Windows hook as part of the User Privilege Management feature. In rare cases, applications display unexpected behavior when hooked. This setting lists the applications where User Privilege Management specific functions are not hooked.

If an application is named in both AppHookEx and UrmHookEx, the AmAppHook.dll is not loaded Multiple entries are delimited by a semi-colon.

UrmPauseConsoleExit Text Used by the User Privilege Management feature. When a console application is elevated, a new application can appear in a new console window. The application runs to completion then closes. This is a problem if the user wants to see the output of the program. This setting causes the application to remain until a key is pressed. This is a semi-colon delimited list of full paths or filenames.
UrmSecPolicy Numeric By default, the security policy is mostly ignored by the User Privilege Management feature. User Privilege Management rules are applied in all cases except for when Audit Only mode is selected. This custom setting allows administrators to force User Privilege Management to follow the configured security policy. For Unrestricted and Self-Authorize security levels, User Privilege Management rules are not applied. For the Restricted level, User Privilege Management rules are applied.

Set to a value of 1 to enable this setting.

UseLegacyDriver Numeric Version 2019.2 uses the Kernel Platform as the default driver technology. This setting provides an option to use the legacy drivers associated with Application Control in case there are any problems with the Kernel Platform filter drivers.