Configuring Enterprise Connectors

After the Enterprise Connector is installed and configured on Core , you can configure the settings on the Connector.

Procedure 

1. Gather the following information:

   • Name: The Enterprise Connector name that was created in Enter the Connector name in the Name field. on Enter the Connector name in the Name field..
   • URL: The URL that was copied in Record the URL. You will need it to configure the Connector. on Record the URL. You will need it to configure the Connector..
   • User ID/password: The one to which the Connector role was assigned in Assigning the Connector role.
2. Log in to the Connector (https://<fully-qualified_domain_name:8443>/mics).
3. Select Connector from the left panel to open the Connector Settings page.

4. Enter the Connector name in the Name field.

   The Connector name must match the name created on Core . It is case sensitive.

5. Enter the Connector URL in the corresponding field.

6. Select Yes for private deployment that accepts the self-signed certificates.

   The default is No. Contact Customer Support for more information.

7. Enter the user ID and password in the respective fields.

   This is the Connector user and role created on Core .

8. Re-type to confirm the password.

9. Click the check box for Outbound Proxy Required.

   Use the following guidelines to specify the settings:

   Item	Description
   Proxy Host Name / IP	Enter the Proxy server host name or IP address.
   Proxy Port	Enter the port on which the Proxy server is listening. The default is set as 8080.
   Proxy Authentication Required	Click the check box if authentication is required for the proxy server. Only HTTP basic authentication is supported.
   Proxy User ID	Enter the User ID for the proxy server.
   Proxy User Password	Enter the password for the proxy server.
   Proxy User Confirm Password	Re-enter the password.

10. Click Test to validate the configuration.

    A dialog appears displaying the status.

11. Click OK to return to the Connector Configuration page.

12. Click Apply. A dialog appears prompting you to confirm that you want to proceed.

    Apply saves the configuration in the current session only. It is not persistent after the machine reboots.

13. Click Yes.

    A dialog appears displaying the status.

14. Click OK.
15. Click Save in the upper-right corner.

Make sure to click Save to make the configuration persistent after the machine reboots.