F5 SSL

This VPN connection type is supported on iOS, , Windows devices. F5 SSL supports Android devices that have Samsung Knox enabled and on Android devices without Samsung Knox.

Use the following guidelines to configure the F5 SSL VPN connection type:

Within these selections, you may make settings for:

Proxy - None (default)

Use the following guidelines to configure a F5 SSL VPN without a proxy.

Table 41.  Proxy - None settings

Item

Description

Name

Enter a short phrase that identifies this VPN setting.

Description

Provide a description that clarifies the purpose of these settings.

Channel

For macOS only. Select one of the following distribution options:

  • Device channel - the configuration is effective for all users on a device. This is the typical option.

  • User channel - the configuration is effective only for the currently registered user on a device.

Connection Type

This setting is not supported on Windows devices.Select F5 SSL.

Samsung Knox

This setting is only supported on Android devices.

Deploy inside Knox Workspace

This setting is only supported on Android devices.

Server

Enter the IP address, hostname, or URL for the VPN server.

Proxy

None is the default setting. To configure a Manual or Automatic proxy, go to Proxy - Manual or Proxy - Automatic.

Username

Specify the user name to use. The default value is $USERID$. Use this field to specify an alternate format, such as:

$USERID$, $EMAIL$, $SAM_ACCOUNT_NAME$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as the following:

  • $USERID$:$EMAIL$

  • $USERID$_$EMAIL$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant username.

Some enterprises have a strong preference concerning which identifier is exposed.

User Authentication

Select the user authentication to use:

  • Password - see next row for information.

  • Certificate - If you select Certificate, select the identity certificate to be used as the account credential.

If you select Certificate, and extended authentication (EAP) is not used, this certificate will be sent out for IKE client authentication. If extended authentication is used, this certificate can be used for EAP-TLS.

Password

Specify the password to use (required.) The default value is $PASSWORD$. Include at least one of the following variables:

$USERID$, $EMAIL$, $PASSWORD$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as $EMAIL$:$PASSWORD$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant password.

VPN On Demand

This setting applies to Windows devices only.

Per-App VPN

This setting does not apply to Windows devices.

Provider Type

This setting applies to iOS and macOS devices only.

Continue to Windows Configuratio.

Continue to Custom Data.

Proxy - Manual

If you select Manual, you must specify the proxy server, port number. and proxy domain information.

Table 42.  Proxy - Manual settings

Item

Description

Name

Enter a short phrase that identifies this VPN setting.

Description

Provide a description that clarifies the purpose of these settings.

Channel

For macOS only. Select one of the following distribution options:

  • Device channel - the configuration is effective for all users on a device. This is the typical option.

  • User channel - the configuration is effective only for the currently registered user on a device.

Connection Type

This setting is not supported on Windows devices.Select F5 SSL.

Samsung Knox

This setting is only supported on Android devices.

Deploy inside Knox Workspace

This setting is only supported on Android devices.

Server

Enter the IP address, hostname, or URL for the VPN server.

Proxy

Select Manual. For an Automatic proxy, see Proxy - Automatic.

Proxy Server

Enter the name for the proxy server.

Proxy Server Port

Enter the port number for the proxy server.

Type - Select Static or Variable for the type of authentication to be used for the proxy server.

Proxy Server User Name

If the authentication type is Static, enter the user name for the proxy server.

If the authentication type is Variable, the default variable selected is $USERID$.

Proxy Server Password

If the authentication type is Static, enter the password for the proxy server. Confirm the password in the field below.

If the authentication type is Variable, the default variable selected is $PASSWORD$.

Proxy Domains (iOS only)

This setting applies to iOS and macOS devices only.

Username

Specify the user name to use. The default value is $USERID$. Use this field to specify an alternate format, such as:

$USERID$, $EMAIL$, $SAM_ACCOUNT_NAME$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as the following:

  • $USERID$:$EMAIL$

  • $USERID$_$EMAIL$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant username.

Some enterprises have a strong preference concerning which identifier is exposed.

User Authentication

Select the user authentication to use:

  • Password - see next row for information.

  • Certificate - If you select Certificate, select the identity certificate to be used as the account credential.

If you select Certificate, and extended authentication (EAP) is not used, this certificate will be sent out for IKE client authentication. If extended authentication is used, this certificate can be used for EAP-TLS.

Password

Specify the password to use (required.) The default value is $PASSWORD$. Include at least one of the following variables:

$USERID$, $EMAIL$, $PASSWORD$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as $EMAIL$:$PASSWORD$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant password.

Per-App VPN

This setting does not apply to Windows devices.

Provider Type

This setting applies to iOS and macOS devices only.

Continue to Windows Configuratio.

Continue to Custom Data.

Proxy - Automatic

If you selected an Automatic proxy, you must specify the proxy server URL and proxy domain(s).

For Windows 10 devices, please add the configuration and value for automatic proxy in the Custom Data Grid. Automatic proxy is not supported in Windows 8.1.

Table 43.  Proxy - Automatic settings

Item

Description

Name

Enter a short phrase that identifies this VPN setting.

Description

Provide a description that clarifies the purpose of these settings.

Channel

For macOS only. Select one of the following distribution options:

  • Device channel - the configuration is effective for all users on a device. This is the typical option.

  • User channel - the configuration is effective only for the currently registered user on a device.

Connection Type

This setting is not supported on Windows devices.Select F5 SSL.

Samsung Knox

This setting is only supported on Android devices.

Deploy inside Knox Workspace

This setting is only supported on Android devices.

Server

Enter the IP address, hostname, or URL for the VPN server.

Proxy

Select Automatic. For a manual proxy, see Proxy - Manual

Proxy Server URL

Enter the URL for the proxy server.

Enter the URL of the location of the proxy auto-configuration file.

Proxy Domains (iOS only)

This setting applies to iOS and macOS devices only.

Username

Specify the user name to use (required.) The default value is $USERID$. Include at least one of the following variables:

$USERID$, $EMAIL$, $SAM_ACCOUNT_NAME$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as the following:

  • $USERID$:$EMAIL$

  • $USERID$_$EMAIL$

 

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant username.

User Authentication

Select the user authentication to use:

  • Password - see next row for information.

  • Certificate - If you select Certificate, select the identity certificate to be used as the account credential.

If you select Certificate, and extended authentication (EAP) is not used, this certificate will be sent out for IKE client authentication. If extended authentication is used, this certificate can be used for EAP-TLS.

Password

Specify the password to use (required.) The default value is $PASSWORD$. Include at least one of the following variables:

$USERID$, $EMAIL$, $PASSWORD$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as $EMAIL$:$PASSWORD$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant password.

VPN On Demand

This setting does not apply to Windows devices.

Per-App VPN

This setting does not apply to Windows devices.

Provider Type

This setting applies to iOS and macOS devices only.

Continue to Windows Configuratio.

Continue to Custom Data.

Windows Configuratio

Allowed Secured Resources (Windows Phone only)

Excluded Secured Resources (Windows Phone only)

See Application-triggered VPN for Windows devices for information on how to configure these settings to set up application-triggered VPN for 8.0.1 devices.

Table 44.  Windows Configurations

Item

Description

Windows Configuration

Enter the secured resources (domains, IP ranges, or apps) used by the Send All Traffic option.

Always On

Select this option to keep the VPN on. Lock Down supersedes this option for Windows devices.

Lock Down

You cannot change the assigned settings unless 1) the Lock Down setting is removed from the profile and the new profile is pushed to the device or 2) the device is un-enrolled from Ivanti EPMM.

This option supersedes the Always On option.

Custom Data

  • Add+ - Click to add a new key / value pair.
  • Key / Value - Enter the Key / value pairs necessary to configure the VPN setting. The app creator should provide the necessary key / value pairs.