Juniper SSL

This VPN connection type is supported on iOS, macOS, Android and Windows devices.

Ivanti, Inc recommends that you use Pulse Secure SSL instead of Juniper SSL.

Use the following guidelines to configure Juniper SSL VPN.

Within these selections, you may make settings for:

Proxy - None (default)

Use the following guidelines to configure a Juniper SSL VPN without a proxy.

Table 52.  Proxy - None settings

Item

Description

Name

Enter a short phrase that identifies this VPN setting.

Description

Provide a description that clarifies the purpose of these settings.

Channel

For macOS only. Select one of the following distribution options:

Device channel - the configuration is effective for all users on a device. This is the typical option.

User channel - the configuration is effective only for the currently registered user on a device.

Connection Type

Select Juniper SSL.

Samsung Knox

This setting applies to Android devices only.

Deploy inside Knox Workspace

This setting applies to Android devices only.

Server

Enter the IP address, hostname, or URL for the VPN server.

Proxy

None is the default setting. To configure a Manual or Automatic proxy, go to Proxy - Manual or Proxy - Automatic.

Username

Specify the user name to use (required.) The default value is $USERID$. Use this field to specify an alternate format, such as:

$USERID$, $EMAIL$, $SAM_ACCOUNT_NAME$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as the following:

$USERID$:$EMAIL$

$USERID$_$EMAIL$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant username.

Some enterprises have a strong preference concerning which identifier is exposed.

User Authentication

Select the user authentication to use:

Password - see next row for information.

Certificate - If you select Certificate, select the identity certificate to be used as the account credential.

Password

Specify the password to use (required.) The default value is $PASSWORD$. Include at least one of the following variables:

$USERID$, $EMAIL$, $PASSWORD$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as $EMAIL$:$PASSWORD$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant password.

Role

Specify the Juniper user role to use as a restriction.

Realm

Specify the Juniper realm to use as a restriction.

VPN On Demand

This setting does not apply to Windows devices.

Per-app VPN

This setting does not apply to Windows devices.

Provider Type

This setting applies to iOS and macOS devices only.

Continue to Windows Configuration.

Continue to Custom Data.

Proxy - Manual

Use the following guidelines to configure a Juniper SSL VPN with a manual proxy.

Table 53.  Proxy - Manual settings

Item

Description

Name

Enter a short phrase that identifies this VPN setting.

Description

Provide a description that clarifies the purpose of these settings.

Channel

For macOS only. Select one of the following distribution options:

  • Device channel - the configuration is effective for all users on a device. This is the typical option.
  • User channel - the configuration is effective only for the currently registered user on a device.

Connection Type

Select Juniper SSL.

Samsung Knox

This setting applies to Android devices only.

Deploy inside Knox Workspace

This setting applies to Android devices only.

Server

Enter the IP address, hostname, or URL for the VPN server.

Proxy

Select Manual. To configure an Automatic proxy, go to Proxy - Automatic.

Proxy Server

Enter the name for the proxy server.

Proxy Server Port

Enter the port number for the proxy server.

Type

Select Static or Variable for the type of authentication to be used for the proxy server.

Proxy Server User Name

If the authentication type is Static, enter the username for the proxy server.

If the authentication type is Variable, the default variable selected is $USERID$.

Proxy Server Password

If the authentication type is Static, enter the password for the proxy server. Confirm the password in the field below.

If the authentication type is Variable, the default variable selected is $PASSWORD$.

Proxy Domains (iOS only)

This setting applies to iOS and macOS devices only.

Username

Specify the user name to use (required.) The default value is $USERID$. Use this field to specify an alternate format, such as:

$USERID$, $EMAIL$, $SAM_ACCOUNT_NAME$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as the following:

$USERID$:$EMAIL$

$USERID$_$EMAIL$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant username.

Some enterprises have a strong preference concerning which identifier is exposed.

User Authentication

Select the user authentication to use:

Password - see next row for information.

Certificate - If you select Certificate, select the identity certificate to be used as the account credential.

Password

Specify the password to use (required.) The default value is $PASSWORD$. Include at least one of the following variables:

$USERID$, $EMAIL$, $PASSWORD$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as $EMAIL$:$PASSWORD$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant password.

Role

Specify the Juniper user role to use as a restriction.

Realm

Specify the Juniper realm to use as a restriction.

VPN On Demand

This setting does not apply to Windows devices.

Per-app VPN

This setting does not apply to Windows devices.

Provider Type

This setting applies to iOS and macOS devices only.

Continue to Windows Configuration

Continue to Custom Data.

Proxy - Automatic

Use the following guidelines to configure a Juniper SSL VPN with an automatic proxy.

Table 54.  Proxy - Automatic settings

Item

Description

Name

Enter a short phrase that identifies this VPN setting.

Description

Provide a description that clarifies the purpose of these settings.

Channel

For macOS only. Select one of the following distribution options:

Device channel - the configuration is effective for all users on a device. This is the typical option.

User channel - the configuration is effective only for the currently registered user on a device.

Connection Type

Select Juniper SSL.

Samsung Knox

This setting applies to Android devices only.

Deploy inside Knox Workspace

This setting applies to Android devices only.

Server

Enter the IP address, hostname, or URL for the VPN server.

Proxy

Select Automatic. To configure a manual proxy, go to Proxy - Manual .

Proxy Server URL

Enter the URL for the proxy server.

Enter the URL of the location of the proxy auto-configuration file.

Proxy Domains (iOS only)

This setting applies to iOS and macOS devices only.

Username

Specify the user name to use (required.) The default value is $USERID$. Use this field to specify an alternate format, such as:

$USERID$, $EMAIL$, $SAM_ACCOUNT_NAME$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as the following:

$USERID$:$EMAIL$

$USERID$_$EMAIL$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant username.

Some enterprises have a strong preference concerning which identifier is exposed.

User Authentication

Select the user authentication to use:

Password - see next row for information.

Certificate - If you select Certificate, select the identity certificate to be used as the account credential.

Password

Specify the password to use (required.) The default value is $PASSWORD$. Include at least one of the following variables:

$USERID$, $EMAIL$, $PASSWORD$, $USER_CUSTOM1$, $USER_CUSTOM2$, $USER_CUSTOM3$, $USER_CUSTOM4$, $CUSTOM_DEVICE_Attributename$, $CUSTOM_USER_Attributename$, $NULL$

You can use combinations such as $EMAIL$:$PASSWORD$

Enter $NULL$ if you want the field presented to the user to be blank. Users will need to fill in the relevant password.

Role

Specify the Juniper user role to use as a restriction.

Realm

Specify the Juniper realm to use as a restriction.

VPN On Demand

This setting does not apply to Windows devices.

Per-app VPN

This setting does not apply to Windows devices.

Provider Type

This setting applies to iOS and macOS devices only.

Continue to Windows Configuration.

Continue to Custom Data.

Windows Configuration

Allowed Secured Resources (Windows Phone only)

Excluded Secured Resources (Windows Phone only)

See Application-triggered VPN for Windows devices for information on how to configure these settings to set up application-triggered VPN for 8.0.1 devices.

 

Table 55.  Windows Configurations

Item

Description

Windows Configuration

Enter the secured resources (domains, IP ranges, or apps) used by the Send All Traffic option.

Always On

Select this option to keep the VPN on. Lock Down supersedes this option for Windows devices.

Lock Down

You cannot change the assigned settings unless 1) the Lock Down setting is removed from the profile and the new profile is pushed to the device or 2) the device is un-enrolled from Ivanti EPMM.

This option supersedes the Always On option.

Custom Data

  • Add+ - Click to add a new key / value pair.
  • Key / Value - Enter the Key / value pairs necessary to configure the VPN setting. The app creator should provide the necessary key / value pairs.