Ivanti Standalone Sentry configuration wizard prompts and options

The following table provides sequence of prompts and actions in the configuration wizard for Ivanti Standalone Sentry.

Table 9.   Configuration wizard prompts and actions

Prompt

Enter

System properties, Admin accounts setup

Welcome to the Configuration Wizard

Use the “-“ character to move back to a previous field.

Continue with configuration dialog? (yes/no):

yes

Do you accept the End User License Agreement?:

yes

Enter yes to accept the End User License Agreement.

Company name

A name that identifies your organization.

Contact person name

The name of the responsible person in your organization.

Contact person email

The email address for the responsible person.

Enter enable secret:

A password for privileged access.

The password must be alphanumeric and contain 6-20 characters.

Enter enable secret (confirm):

Re-enter the password you just set.

Administrator User Name:

User name for the Sentry administrator.

Administrator Password

Password for the Sentry administrator.

Administrator Password (confirm)

Re-enter the password.

Network setup

DHCP and SSH are enabled by default. SSH can be disabled after doing the initial setup.

Hostname

A valid FQDN.

Ivanti recommends that you use the Public DNS name provided by AWS.

Configure NTP? (yes/no):

yes

Enter yes to specify the time source.

If you decide not to set up NTP access, then you will be prompted to set the system clock.

NTP server 1 hostname or address:

The hostname or IP address of the NTP server.

The NTP server address should be a public IP address reachable by Standalone Sentry.

Example: time.apple.com

NTP server 2 hostname or address:

The hostname or IP address of another time source, or press Enter if you have finished entering time sources.

The NTP server address should be a public IP address reachable by Standalone Sentry.

Example: time.apple.com

NTP server 3 hostname or address:

The hostname or IP address of another NTP server, or press Enter if you have finished entering time sources.

The NTP server address should be a public IP address reachable by Standalone Sentry.

Example: time.apple.com

Commit this config?

yes