Configuring Windows Autopilot Profiles

Windows Autopilot is a Microsoft feature that helps administrators to setup and pre-configure new devices to make them business ready. The Autopilot feature helps with a quick, reliable, and seamless provisioning of Windows Desktop or HoloLens2 devices. In addition, the Autopilot feature helps perform the following tasks:

  • Automatically join devices to Azure Active Directory (AAD)
  • Auto-enroll devices into MDM services
  • Create and auto-assign devices to configuration groups based on the profile of the device
  • Customize the enrollment experience
  • Apply configurations and policies
  • Install essential applications

Prerequisites

Administrators can create user profiles from the Windows Autopilot page in the Ivanti Neurons for MDM administrator portal. Ensure that the following prerequisites are met for the Autopilot feature to function as expected:

  • The Autopilot feature (feature.autopilot) is enabled
  • The Ivanti Neurons for MDM tenant is integrated with AAD tenant
  • A dummy user is created and synced - fooUser@<aad-domain>

Autopilot Enrollment Modes

After you associate devices with a specific user profile group, basis the device usage, you can configure the Autopilot enrollment mode to allow users to quickly get started with their device. Ivanti Neurons for MDM provides the following Autopilot enrollment modes:

  • Self-Deploying mode
  • User-Driven (Pre-Provisioned mode)
  • User-Driven

Self-deploying autopilot mode - The self-deployment Autopilot device enrollment mode ensures a seamless deployment of an enterprise device for a user by bypassing the initial device setup and by pushing all the necessary configuration files that are required for the device to securely get started. This mode secures the hardware, connects the device to the enterprise network, enrolls the device to the Azure Active Directory (AAD), the MDM service, and to the Ivanti Neurons for MDM administrator portal using a dummy user ID and all the necessary configuration files are pushed to the device before the user logs in. After the mandatory configuration files are pushed to the device, the device restarts and displays the login screen for the enterprise user to get started. You can use the self-deploying mode for a device that can be used as a kiosk or digitally signed device.

User-driven pre-provisioning profile mode – Once the administrator creates a User-driven pre-provisioned profile, assigns the profile to a user group, and the device hardware ID is uploaded and is assigned to the AAD group. The device will be associated to the user-driven pre-provisioned profile. This mode is used by the administrator to setup a device before it is handed over the enterprise user. The process involved is as follows:

Procedure

  1. Connect the new hardware device to the LAN and press the Windows button five times.
  2. The device displays a question prompt. Select the option Windows autopilot provisioning and click Continue. The Intune detects the User-driven pre-provisioning profile mode, and all the basic configuration settings are deployed in the device. The Windows Autopilot Configuration screen is displayed.
  3. Click Proceed. The device progresses and secures the hardware, connects the device to the enterprise network, enrolls the device to the Azure Active Directory (AAD), the MDM service, and to the Ivanti Neurons for MDM administrator portal using a dummy user ID and all the necessary configuration files are pushed to the device and a confirmation message appears.
  4. You can now hand over the device to the user. When the user logs in to the device, the user ID is enrolled into the Ivanti Neurons for MDM administrator portal with the device details.
  • The following configurations are pushed automatically before the user logs in to the device:
    • Identity Certificate
    • Wi-Fi
    • Windows Hello For Business
    • Windows Restrictions

    • The rest of the configurations are in Pending state and are pushed after the user logs in to the device using an email address.

    During the Autopilot enrollment process in Self-deploying and User-driven (pre-provisioning) modes, the assigned .MSI and .EXE apps will be installed on the device to complete the enrollment process. When installing the .MSI and .EXE apps during Autopilot enrollment process, if the apps report or fail to report during the installation, the Autopilot process will be completed and the Reseal button will be enabled.

    Creating Windows Autopilot User Profiles

    After you configure the Azure Active Directory (AAD) User Source and sync the users and AAD user groups with the Ivanti Neurons for MDM tenant, you can create the Autopilot profiles.

    Procedure

    1. Log in to the Ivanti Neurons for MDM administrator portal.
    2. Go to Admin > Microsoft Azure > Windows Device Management.

      If the AAD User Source is not configured, the Add button will be disabled. You need to configure the User Source using the Windows Device Management option present under the Microsoft Azure section.

    3. Click Add.

      The Add Windows Autopilot Profile page appears on the screen.

    4. Enter a profile name in the Name box.
    5. Complete the Profile Settings using the table below this procedure.
    6. Click Next.

      A new page with all the AAD Device Groups appears on the screen.

    7. Select the one or more AAD Device Groups to which the Autopilot Profile must be assigned.

      8. You can also create a AAD Device Group and assign the Autopilot Profile to this newly created group. See Creating AAD Device Groups for more information.

    8. If you want to assign the Autopilot Profile to all the AAD Groups, select the Assign to all AAD Groups option.

      You cannot assign more than one profile to “All Groups” due to a limitation from Microsoft.

    9. Click Done.

    Setting

    Description

    Device Type

    Select one of the following two options depending on the device:

    • Windows PC

    • HoloLens - When this option is selected, the default deployment mode should be set to Self-Deploying mode.

    In rare cases, when enrolling HoloLens 2 devices using Autopilot, the enrollment might get stuck on the 'Setting up your device for work' screen. In such a rare case, the user must power off and on the device by pressing the Power button. The device then shows the Login screen where the user should enter the AAD credentials to complete the enrollment.

    Deployment mode

    • Self-Deploying: In this mode, the device deployment happens with little or no manual involvement.

    • User-Driven: Administrators can use this option to select the enrollment mode to configure a new device for the user before they hand over the device to the user.

    User account type

    • Administrator: Select this option if the user needs complete control once the device is deployed.

    • Standard: Select this option if the user needs authorization to the basic options once the device is deployed.

    Language

    By default, the language will be Operating system specific. You can change to a different language from the list.

    Convert all targeted devices to Autopilot

    Select this option to convert all devices in the assigned group to Autopilot.

    Allow Pre-provisioning

    Select this option to register devices for Autopilot using the normal registration process. This option is not available when the Self-Deploying option is selected.

    Automatically configure keyboard

    Select Yes to skip the Keyboard selection in case the Language option is set to a different value other than the default value.

    Device name template

    Enter a template name to use during the device enrollment process.

    Microsoft Software License Terms

    You can Show or Hide this option only in User-Driven Deployment mode only.

    Privacy settings

    You can Show or Hide this option only in User-Driven Deployment mode only.

    Change account options

    You can Show or Hide this option only in User-Driven Deployment mode and when the User account type is Standard type.

    Windows Device Management

    The administrator can configure the Autopilot feature on a tenant using the new option Windows Device Management. This option makes it easier to integrate with Ivanti Neurons for MDM if the user has an AAD environment.

    To access this option, Admin > Microsoft Azure > Windows Device Management.

    This integration grants permissions to Ivanti Neurons for MDM to manage devices, Autopilot profiles, check Windows device compliance, and validate the Azure tenant.

    Related Topics

    Creating AAD Device Groups

    The administrator can create AAD Device Groups, as and when needed, from the AAD Device Groups section. The AAD tenant validation must have been configured under the Device Compliance section to create AAD Device Groups.

    Procedure

    1. Go to Admin > Microsoft Azure > AAD Device Groups.

      2. The Azure Active Directory Device Groups page appears on the screen.

    2. Click ADD.

      3. The Group Settings page appears on the screen.

    3. Provide the following details:
      • Group Name
      • Group Description
      • Membership Type
        • Static Device - The administrator will get the list of available static devices on the Assign Members to Group window. Select the required devices and click Save.
        • Dynamic Device - The administrator has to provide certain criteria from the Dynamic Query window.

    The new AAD Device Group will be created and the administrator can add devices to the newly created group.

    After creating a dynamic group, the devices will be listed under the Devices tab of the specific device group after sometime.

    Editing Autopilot Devices

    Users can edit the Autopilot devices from the Ivanti Neurons for MDM administrative portal.

    Prerequisites

    Ensure that the following prerequisites are met:

    • The user must have a Microsoft Intune license assigned to him
    • A user-friendly name can be set only if the user is set
    • The device name cannot be unset once set

    Procedure

    1. Log in to the Ivanti Neurons for MDM administrative portal.
    2. Go to Admin > Windows > Autopilot. The Autopilot Devices are listed under the Autopilot Devices tab.
    3. Click Edit (pencil icon). The edit page appears.
    4. Edit the following details:
      • User
      • User Friendly Name
      • Device Name
      • Group Tag
    5. Click Save. The device details are updated.

    Deleting Autopilot Devices

    Users can delete the Autopilot devices from the Ivanti Neurons for MDM administrative portal.

    1. Log in to the Ivanti Neurons for MDM administrative portal.
    2. Go to Admin > Windows > Autopilot. The Autopilot Devices are listed under the Autopilot Devices tab.
    3. Click Delete. The device details are deleted.