Avalanche powered by Wavelink
Manually Modifying the Enabler Configuration
If the AIDC Enabler is already installed, you can configure it through the Enabler interface.
To configure an installed Enabler using the Enabler interface:
1.From the Enabler, click File > Settings.
2.If prompted, type the password in the Input Settings Password dialog box. (The default password is system)
4.If you are connecting to Avalanche for the first time, on the Connection tab, enter the Avalanche Server address.
5.Use the tabs at the bottom of the screen to configure additional settings.
Was this article useful?
The topic was:
Not what I expected
Copyright © 2018, Ivanti. All rights reserved.