If you manage your devices through a mobile device management service other than Avalanche, you can configure your Studio Client settings through the Wavelink Configurator and download the configurations as a file for mass distribution. Using this tool, you can create the configuration in the Configurator Console, export it to a location accessible to your devices, and then use your management software to send a key-value pair to the Client that points to the configuration file.
You can configure multiple host profile payloads for each device, but only one client settings payload to a configuration file.
For the key-value pair, the Key is com.wavelink.configuration.url. The Value is the location for where you are hosting the Configuration.json file, whether it is a web server or network drive location.
Configuring the Studio Client with a key-value pair can only be performed on devices with iOS 7.0+.
To configure the Studio Client when the device does not have an Avalanche license and is managed by another service:
1 Go to https://configurator.wavelink.com.
2 Register and log in to the Wavelink Configurator Console.
3 Navigate to the folder where you want the payload created.
4 From the Profiles tab, click Add Payload in the Available Payloads panel.
5 The Payload dialog box appears. Select the iOS and Android option, and then the type of Studio configuration payload you want to create.
6 Configure the options as desired and click Save.
7 From the Profiles tab, click Add Profile in the Available Profiles panel.
8 The Smart Device Profile dialog box appears. Click Application Configuration.
9 Create a name for the profile, then select the Studio payload or payloads you want to associate with the profile. Save your changes.
10 Select the profile you created and click Apply in the Available Profiles panel.
11 Click the profile name.
12 On the Application Configuration Profile page, click Export Config.
Your browser downloads the Configuration.json file. This file can be renamed as needed, though the new file name should always be reflected correctly within the key-value pair.
After the key-value pair is deployed to the iOS device from your mobile device manager and the Studio Client is launched, it downloads the configuration file and applies the new settings.
Was this article useful?
The topic was:
Inaccurate
Incomplete
Not what I expected
Other