Use the TermProxy tabs in the Host Profiles dialog box to configure host and ConnectPro or TermProxy failover. You may configure up to three failover connections for a host profile.
When the TE Client attempts to initiate a connection with a host, it will try the addresses listed in the TermProxy tabs first. If it is unable to contact the ConnectPro or TermProxy servers listed, or if there are no servers listed in the TermProxy tabs, it will try to connect to the host directly. Connection attempts occur in the following order:
• Host specified in the TermProxy 1 tab
• Host specified in the TermProxy 2 tab
• Host specified in the TermProxy 3 tab
• Host specified in the Host tab of the host profile
If the TE Client is unable to contact any of the specified hosts, then it will return an error message.
To configure TermProxy failover servers for a host profile:
1 Access the Host Profiles dialog box.
2 Select the host profile for which you want to configure TermProxy failover.
3 Configure the Host tab.
4 Configure the TermProxy tabs.
For more information about the settings in the Host and TermProxy tabs, see Host Profile Configuration Options.
5 After you have finished configuring the host profile, click OK.
The new host profile configuration is saved to the host system.
6 Download the new host profile configuration to the mobile device.
Was this article useful?
The topic was:
Inaccurate
Incomplete
Not what I expected
Other