Enabling Data Capture

Data capture records all network traffic entering and exiting the Session Persistence Server. Enable data capturing from the Logging and Data Capture Settings page or in the Session Persistence Server configuration. By default the data capturing mode is set to off. The data capturing function is a temporary setting and needs to be enabled after each Session Persistence Server restart to continue capturing data.

To enable data capturing from the Session Persistence Server configuration

1.Access the Session Persistence Server web interface.

2.From the menu at the top of the page, click Configuration.

3.The Logging and Data Capture page appears.

4.In the secondary navigation, click Stored Configuration.

5.In the text box, type capture [status], where [status] and clear [status], where [status] is the preferred setting (on or off).

Example:

capture on
clear off

6.Click Validate to validate your changes.

7.Click Save and Restart to save your changes and restart Session Persistence Server.

To enable data capturing from the Logging and Data Capture Settings page

1.Access the Session Persistence Server web interface.

2.From the menu at the top of the page, click Configuration.

3.The Logging and Data Capture Settings page appears.

4.Enable the Data capturing on option to enable data capture mode.

5.In the Client IP addresses to capture text box, enter the IP address or addresses of the Clients from which you want to capture data. If you leave the Enter IP addresses to capture text box empty, all Client data will be captured.

Examples of IP addresses:

Individual: 165.138.5.10
Multiple: 165.192.5.10, 10.204.140.50
Network: 165.192.5.1/24

6.Click Apply Changes.