Service Manager Discovery Utility
The Discovery utility contains tools to enable you to:
•Migrate Ivanti HEAT Discovery Release 9.x settings to Service Manager. Click Migration Tool to open the utility which walks you through the process.
•Test that all processes are running. Click Diagnostic Tool to open the diagnostic utility.
Click the desktop shortcut to open the Discovery Utility. The available tools are listed on the page.
1.Click on Discovery Utility to open the utility
2.Select Migration Tool to open the Server Settings page and enter the following information:
|Server||Enter the path for the Service Manager server. Click Change Server if entering a different location than the one shown.|
Select a tenant from the drop down if more than one is listed. This is the target for the settings.
|a.||Confirm the Discovery configuration and click Save Server Config.|
|b.||Then click Go To Next.|
3.At the Discovery Database Information page enter the following:
|Discovery Database Server||Enter the IP address or domain name for the server.|
Enter the database user name.
|Database password||Enter the database user password.|
|User to access Discovery Share||Enter the user name (usually this is the administrator).|
|User password||Enter the password for the Discover Share user (usually the administrator).|
Click Save the Config then click Go To Next.
4.At the Ivanti HEAT Discovery Migration Selection page, select the settings you want to migrate to Service Manager by checking the box. The options are:
•Migrate User Input Script
•Migrate SNMP setting
•Migrate the subnet scan config
•Migrate the VMHA (Virtual Machine Host Auditor) config
•Migrate the Folder Exclude config
|a.||Confirm the selection by clicking Save the Migration Selection.|
|b.||Click Go To Next.|
5.At the Start the Migration based on previous settings page click Start Migration.
1.Click Discovery Utility to open the utility.
2.Select Diagnostic Tool to open the diagnostic page.
3.At the Test Servers page:
For Central Configure Host field, enter the name of the server where Service Manager is deployed.
4.Click on Get Tenant List to find available tenants and select a tenant from the drop-down list.
5.Click Start Test to check which processes are running on the selected tenant.
The test verifies whether or not the processes are running successfully.
If a process (such as the message queue) has stopped running, the list displays an error message.
After troubleshooting the error messages, you can restart the test by clicking Clear Record then Start Test.