Use the Name Server tab in the Avalanche Update Settings dialog box to manually configure the DNS and domain name settings for the mobile device. You may be required to reboot the mobile device before the new settings are applied.
When this tab is accessed through the Enabler interface, it is the DNS tab. For information on accessing this tab from the device, see Managing Wireless Network Settings from the Enabler.
The Network, Name Server, and Wireless tabs are not available from the Avalanche Enabler configuration package. If you want to configure these options for the mobile device after installation using Avalanche, you can use an Avalanche network profile or Scan to Config.
Name Server Tab
The following list describes the options in the Name Server tab:
|
Configure Name Server Settings |
Indicates whether the Enabler configuration supplies the name server settings for the mobile device. If you have enabled DCHP, the name server addresses may be reassigned by the DHCP server. Default Value: <Disabled> |
|
Primary DNS |
Indicates the IP address of the primary DNS server for the mobile device. Possible Values: Any valid IP address |
|
Secondary DNS |
Indicates the IP address of the secondary DNS server for the mobile device. Possible Values: Any valid IP address |
|
Tertiary DNS |
Indicates the IP address of the tertiary DNS server for the mobile device Possible Values: Any valid IP address |
|
Domain |
Indicates the domain to which the mobile device belongs. Possible Values: Any valid IP address |
Was this article useful?
The topic was:
Inaccurate
Incomplete
Not what I expected
Other
